Programming; First Time Use; Set The Clock - Stenner Pumps ECON T Serie Manual De Uso

PROGRAMMING

FIRST TIME USE

NOTICE: Indicates special instructions or general mandatory action.
Before programming for the first time, the control panel must be reset to the
default settings. Press and hold the
for 5 seconds. The clock will display 00:00 and the timers will be disabled.

1. SET THE CLOCK

Press and hold down the
to adjust to the current day and time.
When the current day and time is set, release the
2. PROGRAM THE FIRST TIMER: TIMER 01
a. Set the Time and the Day for the Pump to Start
Press the
Press the
button repeatedly and the following choices will be displayed:
DAY
SUN = Sunday only
MON = Monday only
TUE = Tuesday only
WED = Wednesday only
THU = Thursday only
FRI = Friday only
SAT = Saturday only
SUN MON TUE WED THU FRI SAT = All days
MON TUE WED THU FRI = Monday through Friday
SUN SAT = Sunday and Saturday
MON WED FRI = Monday, Wednesday and Friday
TUE THU = Tuesday and Thursday
Press the
NOTE: Individual timers can be disabled by setting the on time hour and minutes
to "- - : - -".
b. Set the Time for the Pump to Stop
Press the
NOTE: The days selected for the ON time will be shown and cannot be changed.
Press the
12
Econ T
button, then press the
CLOCK
button once. The display will show TIMER 01 ON.
TIMER
button to select the day or days that the timer will run. Press the
DAY
and buttons to set the ON time for the timer.
HOUR MINUTE
button. The display will now show TIMER 01 OFF.
TIMER
and buttons to set the OFF time for the timer.
HOUR MINUTE
and
CLOCK TIMER
CLOCK
www.stenner.com
buttons simultaneously
, , and
DAY HOUR MINUTE
button. The clock is now set.
buttons