Emergency Information; Product Description; Technical Data - Abicor Binzel ABIMIG A Instructivo De Servicio

3 Product description

NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.

2.3 Emergency information

In the event of an emergency, immediately disconnect the following supplies:
• Switch off the power source
• Cooling water supply
• Gas supply
Further measures can be found in the operating instructions for the power source or the
documentation for other peripheral devices.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).

3.1 Technical data

Transport and storage
Relative humidity
Tab. 1 Ambient temperature
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN ISO 14175)
Wire types
Voltage rating
Protection type of the machine-side connectors
(EN 60 529)
Control device in torch handle
Tab. 2 General torch data according to EN 60 974-7
EN - 4
-25°C to +55°C
Up to 90% at 20°C
DC
Usually positive
CO and mixed gas M21
2
Commercially available round
wires
Peak value of 113 V
IP3X
For 42 V and 0.1 to 1 A
BAL.0402.0 • 2018-08-24
®
ABIMIG