Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL PD-185
6. Temperature Jack.
The connector for the temperature sensor is located lower left-
hand corner of the front panel. To measure a wide range of
temperature (-50 °C to +1300 °C), plug in a K-type thermocouple
and take the reading direct from the digital display.
7. CX (+) / mA μA Input Terminal.
Positive input terminal for current measurement (AC or DC) up
to 400mA. Capacitance measurement up to 40mF. Connection
is made to it using the Red test lead.
8. 20A: 20 Amperes Input Terminal (20A).
This is the positive input terminal for current measurement (AC
or DC) up to 20A. Connection is made to it using the Red test
lead.
9. V /Ω /Hz /
This is the positive input terminal for all functions except current
capacitance measurements. Connection is made to it using the
red test lead.
10. COM /Cx(-) Common Terminal
This is the negative (ground) input terminal for all measurement
modes. Connection is made to it using the Black test lead.
11. Shift Boutton.
It
allows
measurements and the different functions for a same rotary
selector position.
12. RS232 Button
Press the button to activate the communication with the
computer. "RS232" indicator will be activated on the instrument
display.
11/2015
Input terminal.
to
switch
between
Ω /
DCA/ACA,
/
Page 11
Capítulos
Tabla de contenido
