Belkin OmniView PRO3 Manual Del Usario página 25

Installation
Connecting the Primary and Secondary KVM Switches:
Step 1
Using the Daisy-Chain Cable (F1D108-CBL), connect one end to the "Daisy-
Chain In" port on the primary KVM switch (BANK 00).
Step 2
Connect the other end of the Daisy-Chain Cable (F1D108-CBL) to the "Daisy-
Chain Out" port of the first secondary KVM switch (BANK 01).
Step 3
To add secondary units, connect one end of the Daisy-Chain Cable (F1D108-
CBL) to the "Daisy-Chain In" port on the first secondary KVM switch and the
other end to the "Daisy-Chain Out" port of the next secondary KVM switch(for
example, BANK 01).
Step 4
Repeat Step 3 for additional PRO3 KVM Switches you wish to
daisy-chain together.
Note: Your PRO3 KVM Switch is backward-compatible with Belkin OmniView
PRO3 KVM Switches with standard cabling (F1DA104T, F1DA108T, F1DA116T).
In a daisy-chain configuration, the PRO3 KVM Switch with micro-cabling
(F1DA104Z, F1DA108Z, F1DA116Z) must be designated as the primary
KVM switch.
1
2
3
4
5
6
7
8
23 23