Aqua Medic easy line 90 Manual De Instrucciones página 9

2. Spare parts list
Art.-No. Pict.-No.
U605.06 2
U605.01 3
U605.50 4, 7 u. 9
U700.25-32 5 / 7
U605.60 8
U605.65 8
U610.06 11
U610.01 11
U610.13 11
U700.25-8
U700.30-1
U605.52
U700.25-7
U700.25-3
410.360-13
U700.25-6
U608.00
U630.00
3. Set-Up
To fix the unit to a wall, disconnect the two wall brackets from the module and fix them directly on
the wall or a mounting plate - preferably near a tap connection. Press module into the brackets -
ready.
Then, mount the membrane and connect the tubes. To avoid any failures, follow the instructions
carefully:
9
Article
Sediment filter 5 µm with fittings for easy line
Carbonate prefilter with fittings for easy line
Membrane housing
Fitting 1/8" 90° white
Membrane 90 l/day
Membrane 150 l/day
Flushing valve 90 l/day
Flushing valve 150 l/day
Flushing valve 300 l/day
Flow restrictor 300 for easy line 90
Flow restrictor 550 for easy line 150
Holder membrane housing 2 pcs.
Wrench membrane housing
Fitting 1/4" 90° white
Fitting 1/4" white
Water connector 3/4"
Booster pump
PE-hose 4/6 mm, 1 m
Tube fittings:
1. Take the blue lock ring off.
2. Put the hose to a complete stop into the fitting.
3. Refit the lock ring.
4. Pull the hose back as a test that it was placed firmly.
Release the plug connection:
1. Take the blue lock ring off.
2. Squeeze the ring at the fitting. Now, you can pull the tube out.
3. Please don't forget to refit the lock ring.