Beko SPA7131P Manual De Usuario página 14

Troubleshooting
5
Although the appliance is plugged in, soleplate (3) does not heat up.
The appliance may be connected improperly. >>> Check the plug and power
cable (1) of the appliance.
The appliance does not generate steam.
The water reservoir may not have enough water. >>> Fill the water reservoir
with water up to Max level (see. 3.3).
Shock Steam – Vertical Steam does not function.
These functions may have been used too frequently in a very short period of
time. >>> Keep ironing at a horizontal position and wait for a while before
using the shock steam function again. >>> Soleplate (3) may not be hot
enough. Seat the appliance in a vertical position and wait for the soleplate to
heat up.
Water drops fall down onto the fabric during ironing.
You may not have securely closed the water refill lid (5). >>> Close the water
refill lid securely.
During ironing, sediments and residues fall down from the soleplate (3).
If the water you use for your appliance is too hard, such sediments may form.
>>> Use the self-clean function for once or a few times (see. 4.2). For the
subsequent ironings fill the water reservoir of the appliance with a mixture of
tap water and potable water.
The appliance drops water after it cools down or stored.
You may have left the appliance on a horizontal position while there is water in
its reservoir. >>> Empty the water reservoir.
Stains at the soleplate (3).
Wet garments might have been ironed and the soleplate (3) has had lime stains.
>>> After the appliance cools enough, wipe the soleplate with a microfiber
knitted or cotton cloth soaked in vinegar.
14 / EN
Steam Iron / User Manual