Driveline With Automatic Clutch; Side Drivelines; Hitching To The Tractor - breviglieri mekfold 300 Instrucciones De Empleo Y Mantenimiento

4.1.3 DRIVELINE WITH AUTOMATIC CLUTCH

On request, the Manufacturer can supply a driveline complete with automatic clutch calibrated for a medium-duty load. This
clutch cannot be adjusted.
In the event of an overload, the clutch slips and continues to operate as soon as the obstruction has been passed, without external
intervention. Any clutch servicing operations must be carried out in the workshop in compliance with the driveline manufacturer's
instructions.

4.1.4 SIDE DRIVELINES

The two side drivelines (7 Fig. 1) transmit drive from the reduction gear housing/central transmission (16 Fig. 1) to the two side
final drives (14 Fig. 1).Standard supply includes drivelines with CE marking plus relative shields and chains. They are equipped with
a torque limiter with shear bolt calibrated for a medium stress. If the implement encounters a particularly resistant obstacle and
the bolt shears, it must be replaced with a new one of the same size and material.
If the side drivelines (7 Fig. 1) are removed, it is very important to ensure that they are remounted in the same position, i.e.
the fork of the left driveline must be positioned at the same angle as the right one, otherwise the transmission unit could

4.2 HITCHING TO THE TRACTOR

Hitching to the tractor could be a dangerous operation. Take great care and strictly comply with the instructions.
In order to achieve the utmost stability and ensure that the entire operation is carried out in safe conditions, the folding harrow
Proceed in the following way to hitch the machine to the tractor in the correct way:
▪
Make sure that you are using a tractor whose configuration suits the machine in question.
▪
Make sure that there are no objects, bystanders and/or animals in the immediate vicinity of the machine and that the PTO
is disengaged.
▪
Make sure that the machine is in a stable, horizontal position, then back up the tractor towards the machine.
▪
Having reached the right position, turn off the tractor engine then fit the driveline first into the PTO of the machine and
then to the tractor PTO. Make sure that it is firmly locked in position.
▪
Move the power lift bars near and fit them into the plates. Insert the plug and lock in place with the supplied split pins.
▪
Since the power lift links of each tractor are a certain length and have a hole of a certain diameter, you must find the most
suitable position for the tractor you use by inserting the pins into the relative holes according to your needs and depending
on the diameter.
▪
Lock the power lift bars with the relative chains and idlers parallel to the tractor. This must be done to prevent the machine
from swinging sideways.
▪
Insert the driveline and make sure that it is perfectly locked on to the tractor PTO. Check that the guard is free to turn. Fix
the driveline shield with the relative chain. Remove the driveline support and fix it to the relative hitch on the linkage.
mekfold 300
CAUTION
be damaged.
DANGER
must be opened before it is hitched to the tractor.
- 29 -
macchine agricole