Annual Maintenance - Weber Q300 Guia Del Propietario

AnnuAl mAintenAnCe

inspection and Cleaning of the spider/insect screens
To inspect the spider/insect screens, look under right swing-up work surface behind the
control knobs. If there is dust or dirt on the screens, remove the burners to clean the
screens.
Brush the spider/insect screens lightly with a soft bristle brush (i.e., an old toothbrush).
m CAution: do not clean the spider/insect screens with hard
or sharp tools. do not dislodge the spider/insect screens or
enlarge the screen openings.
Lightly tap the burners to get debris and dirt out of the burner tubes. Once the spider/
insect screens and burners are clean, reinstall the burners.
If the spider/insect screens become damaged or cannot be cleaned, please contact the
Customer Service Representative in your area using the contact information on our web
site. Log onto www.weber.com .
®
main burner flame Pattern
The Weber ® gas barbecue burner has been factory set for the correct air and gas
mixture. The correct flame pattern is shown.
A) Burner tube (1)
B) Tips occasionally flicker yellow (2)
C) Light blue (3)
D) Dark blue (4)
If the flames do not appear to be uniform throughout the burner tube, follow the burner
cleaning procedures.
◆
mAINTENANcE
1
WWW.WEbER.com
2
3
4
® 35