Refilling The Liquid Propane Cylinder - Weber Q300 Guia Del Propietario

Check
A) Valve to regulator hose connection (1).
B) Valve to outside burner gas line connection (2).
C) Valve to inside burner gas line connection (3).
m wARninG: if there is a leak at connection (1, 2, or 3) turn
off the gas. do not oPeRAte the GRill. Contact the
Customer service Representative in your area using the
contact information on our web site. log onto
www.weber.com .
®
D) Hose to regulator connection (4).
E) Regulator to propane cylinder connection (5).
m wARninG: if there is a leak at connection (4, or 5), remove
propane cylinder. do not operate grill. use a different
propane cylinder and recheck for leaks with soap and water
solution. if a leak persists after retightening the propane
cylinder, turn off the gas. do not oPeRAte the GRill.
Contact the Customer service Representative in your area
using the contact information on our web site. log onto
www.weber.com .
®
F) When leak checking is complete, turn gas supply OFF at the source and rinse
connections with water.
Note: Since some leak test solutions, including soap and water, may be slightly
corrosive, all connections should be rinsed with water after checking for leaks.

RefillinG the liQuid PRoPAne CYlindeR

We recommend that you refill the LP cylinder before it is completely empty.
The proper filling methods for the filling of your cylinder are by weight or volume, as
described in NFPA 58. Please make sure your filling station fills your LP cylinder by
weight or volume. Ask your filling station to read purging and filling instructions on the LP
cylinder before attempting to fill.
Removal of the lP Cylinder
A) Close cylinder valve (turn cylinder valve handwheel clockwise) (1).
B) Unscrew regulator by turning counterclockwise, by hand only (2).
C) Remove LP cylinder from tank bracket by rotating cylinder.
D) Lift cylinder off tank base.
To refill, take LP cylinder to a gas propane dealer.
m wARninG: we recommend that your lP cylinder be filled
at an authorized lP gas dealer, by a qualified attendant,
who fills the cylinder by weight. imPRoPeR fillinG is
dAnGeRous.
m CAution: Place dust cap on cylinder valve outlet whenever
the cylinder is not in use. only install the type of dust cap
on the cylinder valve outlet that is provided with the cylinder
valve. other types of caps or plugs may result in leakage of
propane.
◆
26
GAS INSTRUcTIoNS
1
◆
2
4
1
3
5
2