Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTING THE MICROPHONE
Alesis LineLink is a plug-and-play device, which means that there
are no drivers to install.
computer, it will automatically install all the necessary driver
components and be ready to use.
ABOUT AUDIO LATENCY
"Latency" is the time it takes for your computer's soundcard to process incoming data and output a sound.
The lower your latency is, the faster your computer will respond to commands and output sound.
If you experience significant delay between the time you sing into the microphone and the time that the
computer outputs audio, we recommend going into your software's "Preferences" settings to make sure
that your soundcard's latency (or buffer) is set to a low number – ideally lower than 15-20ms.
If you still experience too much latency after adjusting your software latency settings, download the free
ASIO4ALL (Audio Stream Input/Output) driver for PC at www.asio4all.com.
perform better and with lower latency since they create a more efficient communication between audio
devices and software.
AUDIO SETUP
In most cases (especially if you are using Windows) LineLink will be automatically selected as your
computer's default recording device. If you find you are unable to record any audio with LineLink, follow
the instructions below for your operating system.
You can use LineLink with any digital audio workstation or recording software that supports USB audio
devices. Be sure your audio software program is set up to receive audio via LineLink. This can usually be
done in your software's "Preferences" or "Device Setup." Please consult your software manual for more
information.
WINDOWS 7
1.
Go to Start Menu
2.
Select the "Recording" tab.
3.
Make sure Microphone – C-Media USB Audio Device is set as the default device, then click "OK."
The first time you connect it to your
Control Panel
Hardware and Sound
Sound.
1
SYSTEM REQUIREMENTS:
PC: Windows XP, Vista or 7
Mac: OS 9 or higher
USB Port
ASIO drivers generally
Tabla de contenido
