Troubleshooting - Philips PR3840 Manual De Instrucciones

ENGLISH
34
Cleaning
Do not immerse the device in water or rinse it
under the tap.
Do not immerse the electrodes in water.
1 Clean the device with a damp cloth and a mild
cleaning agent, e.g. dishwashing liquid.
Note: You can also clean the device with 70% isopropyl
alcohol (IPA).
Caution: Do not use any other cleaning agents
than the ones mentioned above, as other cleaning
agents could damage the material, e.g. cause loss
of gloss.
2 If the electrodes are dirty, put a drop of water
on your finger and gently rub the dirt off the
surface.
Note: Do not use soap or alcohol to clean the
electrodes.

Troubleshooting

This chapter summarises the most common problems
you could encounter with the PulseRelief. If you are
unable to solve the problem with the information
below, visit www.philips.com/support for a list
of frequently asked questions or contact the Philips
Consumer Care Centre in your country.