Changing Scales - Endress+Hauser Chroma-Log Serie Manual De Utilización

3.5 Changing scales

1. Select the scale required from the adhesive scale
sheet. In the delivery there are always 2 sheets per
channel.
Tip: For special ranges you can use the neutral blank
scales and write the required ranges on these.
2. Stick the required engineering units onto the scale.
3. Remove the scale carrier from its retainer (bend
slightly from the middle).
4. Remove the scale from the sheet and stick it onto
the scale carrier.
5. Return the scale carrier to its retainer.
Placing scales onto the scale carrier
3 Installation/Setting up
35