Chauvet DJ Intimidator SPOT LED 250 Guía De Referencia Rápida página 4

Intimidator™ Spot LED 250 QRG
AC Power
Power Linking
Fuse
Replacement
Control Panel
Description
Mounting
Product
Mounting
Diagram
This product has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 6 Intimidator™ Spot LED 250 units at 120 VAC and
11 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact
same type and rating.
4. Re-insert the fuse holder and reconnect power.
Button Function
<MODE/ESC> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Before mounting this product, read the Safety Notes.
Bracket Attachment (x2)
Rubber Feet (x4)
Safety Loop Attachment Point
When using only one mounting clamp, be sure to use a clamp with a
captive bolt to prevent accidental loosening.
4
EN