CAME PLACO-VC 001CK0002 Manual De Instalación página 11

Functions of the terminal boards
VAS/101-CM
OPTIONAL:
Bus module
2 auxiliary exits
NO
Relay 1
C
NO
Relay 2
C
VLS/300
Adjustments
Programming
y For call programming, see the entry panel documentation.
M2
X 5
M1
beep
BOUT
a
b
c
d
M1 M2
– +
– +
B
B
speak audio
microphone audio
electric lock 1-10 s. default 1 s
PROG
Accessing programming Press the button
programming has been accessed a.
SW3
Programming the melody associated to the call from the entry panel (1 acoustic signal). To hear the
melodies in sequence, press the button b. To select the melody and exit programming, press the button
c. To select the melody and continue with programming, press the button
Programming the melody associated with the doorbell (2 acoustic signals). For this type of program-
ming b c d proceed as previously described for "Programming the melody associated to the call from the
entry panel".
Programming the number of call rings (3 acoustic signals). press the button the number of times equal
to the number of rings selected for the call (from 1 to 6 rings) e. 3 s after the button is pressed the last time,
the call selected for the selected number of rings will be will be reproduced. To select the melody and exit
programming, press the button
e
M2
M1
BOUT
five times within 5 s. A brief acoustic signal will confirm that
f.
PROG
Terminal board
Bus
SW3
BOUT
(not polarised)
+
Power supply
16-18 VDC
–
Earth
–
Door release
button (NO)
Electric lock
12 V 1 A max
–
Technical features
Entry panel
Power supply: 16-18 VDC
Absorption: 250 mA max (100 mA stand-by)
Dimensions: 99x207x30 mm
Storage temperature: -25 °C +70 °C
Operating temperature: -15 °C +50 °C
IP degree: IP 54
Video camera
Standard video: PAL/NTSC
Resolution: 680x512 pixels
Minimum lighting: 1 LUX
d.
f
EN
5