EN
PROBLEM
Pressing the switch (34), the
machine will not turn on.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.
TROUBLESHOOTING
CAUSE
Circuit switch to position "0".
Switch failure.
Power cable disconnected.
Function card damaged.
Brush motor damaged.
Switch failure.
Brush
rotation
enabling
switch not pressed.
Function card damaged.
Intake motor damaged.
Switch failure.
Suction
unit
switch
pressed.
Recovery tank full.
Aspirator off.
Switch failure.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee
rubber
worn.
EN-12
SOLUTION
Press the power switch.
Replace the switch.
Connect the cable.
Replace.
Replace.
Replace the switch.
Press the switch.
Replace.
Replace.
Replace the switch.
not
Press the switch.
Drain, flush and clean the
tank.
Start up the aspirator.
Replace the switch.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades
Replace or turn over the
squeegee rubber blades.
No w
Insu
The
Asp
No w
Durin
All pa
In ord
cente