Frequently Asked Questions; Technical Speci Cations - KlipXtreme Keon Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

VII. Frequently asked questions
a. How to reconnect your phone with the device when connection has failed.
If the BT connection was not successful at the first time, disconnect your mobile
phone and try to connect again. The headphones will pair automatically as soon
as you turn them on.
b. How to mute the microphone.
During a call, press and hold the Volume + and Volume - buttons for about 1
second at the same time to mute the microphone. Press and hold them again to
unmute.
c . What is the password for pairing?
Some devices require a password for pairing. You can try the following
sequences: 0000 (four zeros), 8888 (four eights), 1111 (four ones) or 1234 (one,
two, three, four), to see which one works.
d . Which devices can be used to charge your headphone?
Any car charger, power bank, PC, or any other device with a 5VDC ≤500mA
charging current could be used to charge this item.
e. How to delete paired devices.
1. Turn on the headphones, and proceed to disconnect the Bluetooth
mobile device.
2. Press and hold the Power/Multifunction and Volumen+ buttons at the same
time for about 5 seconds to delete previously paired devices; the blue and red LEDs
will blink fast indicating that the unit has entered into the pairing process.
3. To pair your headphones with the last mobile device previously disconnected click
OK on the "Bluetooth
pairing request" that will be displayed on the screen.
®

Technical speci cations

MPN
Headphone
Form factor
Driver unit
Maximum power output
Frequency
Impedance
Sensitivity
Charging input (DC)
Microphone
Form factor
Directivity
Frequency
Impedance
Sensitivity
Volume control
Connectivity
Connection type
Wireless RF frequency
Wireless range
mode from your
®
Battery
Battery type
Battery charging time
Battery run time
Battery standby time
KWH-500
On ear
40mm
20mW
2.402-2.480GHz
32
(-40dB)±3dB
5V DC ≤500mA
Built-in
Omnidirectional
20HZ-16,000HZ
<2.2K
(-40dB)±3dB
Yes
Bluetooth® V. 5.0
2.402-2.480GHz
100ft or more (BT V. 5.0),
33ft (BT other versions)
400mAh/3.7V lithium ion-polymer battery
2 hours
21 hours at 50% volume capacity*
18 hours at 100% volume capacity*
About 200 hours
Tabla de contenido
loading

Este manual también es adecuado para:

Kwh-500

Tabla de contenido