Backlight Mode - Honeywell Home HVC0001 Guia Del Usuario

Owner's Guide 69-2316EFS
Set the Backlight mode
The controller provides 3 backlight modes. Depending on the mode selected, the screen behaves as
follows:
•
Scrn Off: The screen is not lit (the backlight is off).
• Scrn On HI: The screen is lit at high intensity.
• Scrn On LO: The screen is lit at low intensity (default mode).
When you press any button, the screen is lit at high intensity for 8 seconds.
To set the backlight
mode, press the
main button for 3
seconds to display
the setup menu and
proceed as shown:
(2 times)
8
Press the main but-
ton for 3 seconds at
(2 times)
any time (or do not
press any button for
60 seconds) to save
any changes you
have made and exit
Set Backlight the setup menu.