General; Description - Promax PROLITE-67 Manual De Instrucciones

USER'S MANUAL PROLITE-67
FTTH TESTER & SELECTIVE OPTICAL

1 GENERAL

1.1

Description

The PROLITE-67 is an instrument that can measure simultaneously and in a
selective way the three wavelengths used in optical fiber. It has a selective receiver with
a filter for each band that makes a real and very stable measurement of each
wavelength. With this feature you will be able to certify any facility according to the
infrastructure policy.
The PROLITE-67 is able to work in any optical fiber system, but it is optimised for
systems based on GPON networks that use technologies FTTx / PON, which provide
speeds over 1 Gbps.
In the design of the PROLITE-67, it was paid special attention to create a
practical and accurate instrument and, at the same time, easy to use. Once inside a
function of the instrument, it is very easy to modify any parameter.
In addition to make common measurements in optical fiber installations, the
PROLITE-67 measures wavelengths on active networks such as RFoG and xPON.
Results will be displayed just plugging the fibre cable from the distribution centre to the
OLT input connector and the fibre cable from the user to the ONT input connector.
Then, pressing a key you will see the results on the screen. When the PROLITE-67 is
taken measures it acts as a pass-through instrument and extracts a small percentage of
the signal to measure, so the optic fibre service is not interrupted.
07-2012
POWER METER
PROLITE-67
Figure 1.-
Page 1