General; Description - Promax PROLITE-75 Manual De Instrucciones

USER'S MANUAL. PROLITE-75
OPTICAL ANALYSER

1 GENERAL

1.1

Description

The PROLITE-75 is a tool to install, maintain and analyse general fiber optic
systems, and particularly FTTx-GPON systems. GPON networks use FTTx / PON
technology, delivering speed higher than 1 Gbps. In such networks, Upstream signals
are sent by the ONT (Optical Network Termination) in bursting mode, that is, it sends a
large amount of information in short time. The GPON METER module of the
PROLITE-75 has a function designed specifically to analyse the behaviour of these
signals over time.
In the design of the PROLITE-75, it was paid special attention to create a
practical and accurate instrument and, at the same time, easy to use. In this way, it has
been created a menu that allows accessing to the different operating modes directly,
through a simple system (ambidextrous) of softkeys, cursor keys and an alphanumeric
keypad. Once inside a function of the instrument, it is very easy to modify any
parameter.
All this makes the PROLITE-75 a great tool for installing and maintaining this type
of installations. Results will be displayed just plugging the fibre cable from the
distribution centre to the OLT input connector and the fibre cable from the user to the
ONT input connector. Then, pressing a key you will see the results on the screen. When
the PROLITE-75 is taken measures it acts as a pass-through instrument and extracts a
small percentage of the signal to measure, so the optic fibre service is not interrupted.
The instrument has an USB output connector to connect it to a computer. In this
way you can obtain reports or update firmware.
Next are explained functions of the PROLITE-75.
04-2009
PROLITE-75
Figure 1.-
Page 1