Maintenance; Maintenance Schedule - Briggs & Stratton PRO Serie Manual Del Operador

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse
conditions noted below.
Maintenance Schedule - Fill in Dates as You Complete Regular Service
Maintenance Task
Pressure Washer
Check/clean water inlet screen
Check high pressure hose
Check detergent siphoning hose/ filter
Check spray gun and hose assembly
for leaks
Prepare pump for storage below 32°F
Engine
Check oil level
Clean debris
Change engine oil
Service pre-filter
Service air cleaner
Service spark plug
Service spark arrester
Air cooling system
Check valve clearance
Prepare for storage
1 Clean if clogged. Replace if perforated or torn.
2 Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change oil sooner when operating under dirty or dusty conditions.
3 Replace more often under dirty or dusty conditions.
Follow the daily, hourly or calendar intervals, whichever occurs first.
Maintenance Item:
Check Pump Oil Level/Quantity
Check for Oil Leaks
Check for Water Leaks
Break-in Oil Change
*Routine Oil Change
**Seal Change
Valve Change
Check Accessories
* If other than CAT Pump Model 6107 oil is used, change cycle should be every 300 hours.
** Each system's maintenance cycle will be exclusive. If system performance decreases, check immediately. If no wear at 1500 hours, check again at 2000 hours and each 500
hours until wear is observed. Valves typically require changing every other seal change.
Duty cycle, temperature, quality of pumped liquid and inlet feed conditions all affect the life of pump wear parts and service cycle.
Remember to service the unloader at each seal servicing and check all system accessories and connections before resuming operation. Contact your local service center if
questions arise.
Service Dates
Every 25 Every 50
Before
Hours or Hours or
Each Use
Yearly Yearly
X 1
X
X
X
See Winter Storage
X
X
X 2
X
X
If unit is to remain idle for longer than 30 days.
Pump Preventative Maintenance Check List
Daily 50 hours
X
X
X
X
Every 100 Every 250
Hours or Hours or
Yearly Yearly
Change oil after the first (5) operating hours
X 3
X
X
3
X
500 hours 1,500 hours
X
Service Dates
3,000 hours
X
X
X
17