Features And Controls - Briggs & Stratton PRO Serie Manual Del Operador

Ocultar thumbs Ver también para PRO Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - High Pressure Hose — Connect one end to pressure
washer and the other end to spray gun.
C - Spray Tips — 0°, 15°, 25° and 40°: for various high
pressure cleaning applications.
D - Pressure Control Knob — Varies pressure of
high pressure spray.
E - High Pressure Outlet — Connection for
high pressure hose.
F - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
G - Water Inlet — Connection for garden hose.
H - Pump — Develops high pressure.
J - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
K - Fuel Tank — Fill tank with regular unleaded fuel.
Always leave room for fuel expansion.
L - Choke Lever — Prepares a cold engine for starting.
M - Throttle Lever — Sets engine in starting mode for
recoil starter.
N - Air Filter — Protects engine by filtering dust and debris
out of intake air.
P - Engine Rocker Switch — Set this switch to run (I)
before using recoil starter. Set switch to stop (O) to stop
engine.
Q - Recoil Starter — Used for starting the engine manually.
R - Nozzle Extension with Quick Connect — Allows you to
switch between different spray tips and detergent nozzle.
S - Fuel Valve — Used to turn fuel supply on and off to
engine.
Items Not Shown:
Oil Fill — Check and add engine oil here. Located on
opposite of muffler side of engine
Oil Drain — Drain engine oil here. Located on opposite of
muffler side of engine
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
Turbo Nozzle — Rotates a high pressure stream in a rapid
circular pattern.
Black Detergent Nozzle — Use to siphon pressure washer
safe detergents.
K
L
M
N
P
Q
R
S
11

Capítulos

Tabla de contenido
loading

Tabla de contenido