Honeywell FocusPRO TH6000 Serie Manual De Funcionamiento página 21

In case of difficulty About your new thermostat
Heating or
cooling system
does not respond
"Cool On" or
"Heat On" is
flashing
• Press SYSTEM button to set system to Heat. Make sure the temperature
is set higher than the Inside temperature.
• Press SYSTEM button to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 15).
19
FocusPRO TH6000 Series
®
69-1921EFS—03