Festo Soft Stop SPC11 Manual De Referencia Rápida página 15

1 User instructionsEnglish
The Soft Stop type SPC11-... has been designed for fitting
into a machine or automation system. In conjunction with
permitted drives and measuring systems, as well as with a
proportional directional controlvalve type MPYE-5-..., the
SPC11 permits fast movement into two end positions set
with fixed stops as well as into one or two mid-positions.
Please note
This quick reference is intended only for users who are
familiar with the SPC11. Please observe the safety in-
structions as well as the information on the permitted
combinations of valves, drives and measuring systems.
These can be found in the System manual for the SPC11
(type P.BE-SPC11-SYS-...) and in the associated "Drive-
specific supplement".
Caution
Always switch on the operating voltage supply first and
then the compressed air supply.
Before carrying out installation and/or maintenance
work, switch off the following power supplies either
simultaneously or in the following sequence:
1. the compressed air supply
2. the operating voltage for the SPC11.
Festo SPC11-... 0012NH English 15