Remington I-LIGHT PRO FACE&BODY Guía De Uso Y Cuidado página 12

ENGLISH
F Warnings and precautions - Facial use
F DO NOT use anywhere near the EYES, EYE BROWS or EYE LASHES. When used as directed the light
should not harm the eyes, however if the scattered light is unpleasant you may wish to close your eyes or
look away.
F DO NOT treat SUN BURNED or TANNED SKIN. Wait until the sunburn or tan has completely faded before
beginning a treatment. Remove cosmetics, lotions and creams (including self-tanning products) prior to
treatment. After treatment, use a fragrance-free lotion (SPF 30+) and try to avoid direct sun exposure to the
treated area for at least 24 hours.
F DO NOT flash the LIPS or other DARK SPOTS (dark freckles, moles, birthmarks or tattoos) as these areas
may absorb too much light energy which may cause discomfort or pain. You can cover these areas with
WHITE eyeliner, adhesive labels or thick paper to reflect the light in case of accidental flashing.
F DO NOT treat inside the NOSTRILS or EARS as these areas are delicate.
F CAUTION: Avoid treating areas that contain only vellus hairs (very thin, fine hair known as "peach fuzz")
as this may result in undesired hair re-growth. Remove any visible hair by shaving or trimming. Do not use
wax, epilation, tweezers or depilation products to remove hair before or during the course of treatment
because they counteract the IPL process. If trimming, ensure you trim hair to no more than 0.5mm.
, Changing Treatment Heads
Your i-Light Pro comes with two separate Treatment Heads for Body Hair and Female Facial Hair. The Body
Hair Treatment Head is specially designed for Body Hair and can flash every 2 seconds. The Facial Hair
Treatment Head is specially tuned for Female Facial Hair, minimises light leakage, and can flash every 4
seconds. The Facial Hair Treatment Head is marked with the icon shown in fig. 15.
Fig. 15
To change treatment heads, please follow the instructions provided.
1. Turn the POWER SWITCH off and unplug the POWER CORD from the electrical outlet.
Allow the system to cool down for 5 minutes before attempting to change treatment heads.
2. Hold the Treatment Head with one hand while pressing both Release Buttons with the other hand
and pull gently. Store the unused Treatment Head in a safe location (such as in the packaging) taking
care not to damage the FLASH WINDOW and other components.
12