Idiomas disponibles
Idiomas disponibles
Unpacking
Remove unit from carton and discard all packaging.
HOW TO SET UP YOUR UNIT
Location
of the Air Compressor
Locate the air compressor
in a
clean, dry and well ventilated
area.
The air compressor
should be
located at least 12" (30.5 cm)
away from the wall or other
obstructions
that will interfere
with the flow of air.
The air compressor
pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor
are
necessary to maintain proper
operating temperature.
Do not
place rags or other containers on
or near these openings.
GROUNDING
INSTRUCTIONS
_RISK
OF
--
ELECTRICAL
SHOCK. In the event of a short
circuit, grounding reduces the risk
of shock by providing an escape
wire for the electric current. This
air compressor must be properly
grounded.
The portable air compressor is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following
illustrations).
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.
2,
Make sure the outlet being used
has the same configuration as the
grounded plug. DO NOT USE AN
ADAPTER. See illustration.
_Grounded
_Outlets
3,
4,
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
If these grounding instructions are
not completely understood,
or if in
doubt as to whether the compres-
sor is properly grounded, have the
installation checked by a qualified
electrician.
RISK OF
--
ELECTRICAL
SHOCK. IMPROPER GROUNDING
CAN RESULT IN ELECTRICAL
SHOCK.
Do not modify the plug provided. If
it does not fit the available outlet, a
correct outlet should be installed by
a qualified electrician.
Repairs to the cord set or plug
MUST be made by a qualified elec-
trician.
10 - ENG
