Porcelanosa Systempool Krion 3-WAY Serie Manual Instalación página 12

3-WAY Series
2.3 ON TOP
3) Clean around the underside of the washbasin rim and countertop with denatured alcohol.
4) Bond with adhesive or silicone.
5) Attach the washbasin to the countertop using strips of wood and grips, and leave in place until it dries.
2.4 COMMENTS AND CARE INSTRUCTIONS
3-WAY washbasins do not have overflow openings. This means that in compliance with section 4.7.2 of the EN14688 standard, these
washbasins must be fitted with a drain with a non-closable outlet, so that water cannot accumulate in the washbasin. A closable
outlet can be installed at the customer's risk. To do so, there must be a general drainage outlet in the room to prevent the possibility
of flooding.
2.5 CLEANING THE BOWL
Always rub in regular circular movements and apply cleaning treatments uniformly over the whole surface.
For daily cleaning
Clean with a damp cloth and gentle cream cleaners with microparticles. Then rinse and dry the surface using a cloth. For daily care,
use cleaning products such as Vim™ cream or Jif™ cream.
For more stubborn stains
Apply a daily cream cleaner with microparticles using a blue Scotch Brite™ pad, and rub in a circular motion. Then rinse and dry the
surface with a cloth. Once the stubborn stain has been removed, clean as usual with a damp cloth to ensure a uniform finish.
For persistent stains
Apply a daily cleaning product using a green Scotch Brite™ pad, only in the area of the stain, and rub gently in a circular motion. Then
carry out the same operation using a blue Scotch Brite™ pad, finally repeating the operation with a damp cloth over a wider area to
ensure a uniform finish.
Restoring the appearance of the bowl
Clean as usual and then apply gel bleach over the whole surface and leave overnight. The next day, clean and rub with a damp
cloth, to leave the bowl looking as good as new.
Special attention when using chloride products, for example bleach, for cleaning krion.
Do not cover chromed elements such as drain and taps with these products. They could be
irreversibly damaged.
Adhesive
Silicone
NOTE: SYSTEMPOOL recommends using neutral white S-502 silicone from BUTECH.
EN
Pág. 6/6