Porcelanosa Systempool Krion 3-WAY Serie Manual Instalación página 10

3-WAY Series
2.1 RECESSED
3) Add an extra 3 mm to this perimeter, and cut a rebate leaving a thickness of 3 mm
on the visible side.
4) Now follow steps 2 to 15 from the previous section.
2.2 SEMI-RECESSED
BONDING WITH ADHESIVE
Advantages:
Better visual finish.
Better bond.
Disadvantages:
Longer installation tim.
Difficult to replace.
BONDING WITH SILICONE
Advantages: Quick assembly.
Easy to replace.
Disadvantages:
Achieving an acceptable finish will depend on the chosen colour.
NOTE: If this option is chosen and LUX 1100 sheet is used, SYSTEMPOOL recommends using neutral white S-502 silicone from BUTECH.
1) Place the washbasin in the required position and use it as a template to draw around its perimeter.
2) Measure the width of the underside of the washbasin rim.
3) Subtract 3 mm from the width of the underside of the washbasin rim,
and then subtract this amount from the perimeter you have drawn.
4) Machine this new line.
5) Place the washbasin in the opening and pull it forward as far as possible. Then measure the distance to the edge of the countertop.
6) Now push the washbasin back as far as possible and measure the distance again.
7) Then divide these distances equally to centre the washbasin in the opening.
EN
3 mm
3 mm
3mm
Pág. 4/6