Safety Information; Clearance To Combustibles; Preparation; Assembly Instructions - Pleasant Hearth GLF-5002-50 Manual De Instrucciones

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product . If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:30 a .m . - 4:30 p .m ., CST, Monday - Friday .
Warning:
etc. Keep combustible materials such as furniture, bedding, papers, clothes and curtains at
least 3 feet (914 mm) from the stove.

PREPARATION

Before beginning assembly of product, make sure all parts are present . Compare parts with package
contents list and hardware contents above . If any part is missing or damaged, do not attempt to
assemble the product . Contact customer service for replacement parts .
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (not included): Phillips screwdriver

ASSEMBLY INSTRUCTIONS

Carefully remove all pieces from carton and make
sure that you have all parts listed (refer to parts list
on page 5) . If you are missing parts, please call
customer service at 1-877-447-4768
NOTE: To avoid scratching the finish, assemble
the product on a soft, non-abrasive surface, such
as carpet or cardboard .
1. Attach a mounting bracket (AA) to the top edge
of the back of the mantel (A) by inserting two
screws (EE) through the mounting bracket (AA)
and into the pre-drilled holes in the mantel (A) .
Tighten with a screwdriver .

CLEARANCE TO COMBUSTIBLES

Sides
Floor
Top
Front
Rear
Do not install unit on shelves, raised platforms, beds, blankets, pillows
2 27/64 (61.5 mm)
0 in. (0 mm)
20 in. (508 mm)
36 in. (914 mm)
0 in. (0 mm)
1
A
8
AA
EE
AA
EE