SWITCHING OFF
PROLONGED SWITCHING OFF
If the boiler should remain inactive at length close the gas tap and disconnect power supply of the
appliance.
TEMPORARY SWITCHING ON/OFF
Proceed in one of the following ways:
● use the room thermostat;
● use the adjustment potentiometers (on the instrument panel).
NOTE: with a new boiler or after a long period
of inactivity, one can check for the
locking of the circulating pump. In this
case it is necessary to unscrew the front
stopper and make the motor shaft ro-
tate with a screwdriver.
MAINTENANCE
To ensure long-lasting product functionality and efficiency within the limits prescribed by the laws and
standards in force, the unit must undergo regular maintenance.
Frequency of inspection depends on the specific conditions of installation and use but it is advisable to
have the unit checked once a year by authorised Lamborghini Service personnel. Only properly quali-
fied personnel with specific knowledge in the field of safety, efficiency, environmental hygiene and
combustion may carry out work on the unit. To ensure proper maintenance it is also required that such
personnel be fully updated on the constructive and functional characteristics of the boiler.
Should work or maintenance be carried out on any structures situated near fume ducts and/or fume
discharge devices and their accessories always switch off the boiler and, when work is over, have its
efficiency checked by qualified personnel
IMPORTANT: before doing any cleaning or maintenance work on the unit switch off the electrical power
supply via the switch on the boiler itself. Shut off the gas supply by closing the tap on the boiler. The
above stated work generally involves the following:
-
removal of any oxidation from burners
-
removal of any encrustation from heat exchangers
-
checking connections between the various air/fume pipes
-
general pipe cleaning
38