Stryker FLUID SAFE Manual De Instrucciones página 31

To set values:
• Use the / keys (12) for the nominal pressure.
• Use the / keys (8) for the nominal flow.
To change the display:
• In increments of 5-> by pressing the key briefly
• In increments of 10-> when pressing the key longer
(See Fig. 5-9) All LED's of the display unit are switched on almost simultaneously
with the displays of the pump unit for a performance test.
Afterwards you will see:
Deficit display (16) -> 0
Inflow volume display (17) -> 0
Deficit bar graph (20) -> the upper first segment and the loss rate alarm icon
(19) is illuminated.
(20)
(19)
At the display unit
Fig. 5-9 Messages of the display unit
FLUID SAFE Fluid Management
Systems
Deficit display
(16)
Inflow volume display
(17)
Reset key
(18)
(16)
Deficit rate alarm icon
(19)
Deficit bar graph
(20)
(17)
(18)
Operating the Device
23
EN