Stryker Birthing Bed Manual De Instrucciones página 33

Adjusting the Glideaway footrests with optional calf supports (Continued)
To adjust the calf support:
1. Release the calf support by grasping the gray calf support handle and rotating it to the left
27).
2. Adjust the calf support to the desired position.
3. Lock the calf support by rotating the gray calf support handle to the right
Figure 1-31: Stowed
footrest with calf support
To stow the calf support:
1. Adjust the calf support into the divot housing
2. Lock the calf support in the divot housing by rotating the gray calf support handle to the right
1-27).
3. Push the purple button to restore the footrest to its original position
Note: You cannot stow the footrest unless it is in the original upright position
4. To stow the footrest, pull the purple lever that is located at the bottom of the footrest mechanism
page 1-23).
5. Swing the entire footrest around and under the foot section
Figure 1-35: Divot
housing
www.stryker.com
Operation
Figure 1-32: Accessing
the calf support
(Figure 1-35 on page
Figure 1-36: Restoring the
calf support
4701-209-0 01 REV A
(Figure 1-33 on page
Figure 1-33: Calf support
handle
1-27).
(Figure 1-21 on page
(Figure 1-21 on page
(Figure 1-31 on page 1-27).
Figure 1-37: Restoring the
footrest
(Figure 1-33 on page 1-
1-27).
Figure 1-34: Positioned
footrest with calf support
(Figure 1-33 on page
1-23).
1-23).
(Figure 1-22 on
Figure 1-38: Stowing the
footrest with calf support
1-27
English
EN