4
Pull each curtain panel out until it meets the
window sash track. Pull the bottom window
sash down behind the upper panel guide
until they meet.
Front Angle
NOTE
● Do not pull the window sash down so
tightly that the movement of the curtain
panels is restricted.
5
Attach the cabinet to the inside sill by
driving 3 type B screws through the cabinet
and into the sill.
Front Angle
NOTE
● Install the cabinet with a very slight
downward tilt toward the outside.
CAUTION
● Do not drill a hole in the bottom pan.
The product is designed to operate with
approximately ½" of water in the bottom
pan.
6
Upper Panel
Guide
Sash Track
Inside Window Sill
7
Sash Track
Use a screwdriver or power drill to attach
the curtain panels to the window sashes
by driving type C screws into the sashes
through the cabinet holes shown in the
figure below.
With the aid of an assistant, slide the
unit into the cabinet. Reinstall the screws
removed from the cabinet sides in step 1.
CAUTION
● The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could
result in injury.
● Hold the unit firmly in place until the window
frame is lowered to meet the top surface of
the unit directly behind the upper guide. If
the unit falls from the window, it could cause
personal injury or property damage.
INSTALLATION
13