Installation
PROCEDURE
C
@
Remove the backing
from the 13" shim strips
and attach them as shown below in Fig. 22.
The higher
portion of shim is to be placed
in
front of the rib on the base of wall sleeve.
1" high__ I-
II 3/4"
High
FIG. 21
161
Install the new unit into the wall sleeve
FIG. 22
D
o assemble
trim, snap the tab of each piece
into the slot of the other piece as shown below.
Slide trim over the front of the air conditioner
until trim is flush with sleeve as shown below.
Trim (2 ea)
Wall
FIG. 23
A CAUTION
• Air conditioners
covered
in this manual
pose
an excessive
weight
hazard. Two or more
people
are needed
to move and install the
unit.
To prevent
injury or strain, use proper
lifting
and carrying
techniques
when moving
unit.
• When
handling
the air conditioner,
be careful
to avoid cuts from sharp metal fins on front
and rear coils.
• Make sure air conditioner
does not fall during
removal.
Owner's Manual
17