Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Important note to installer
Please read the following
instructions
carefully
before installing your washer.
These instructions
should be retained for future reference.
We recommend
you hire a professional
to install this washer.
Installation
flow
chart
Selecting a
location
Removing the
shipping bolts
(Front loading
washers only)
Connecting the
water and drain
Adjusting the
p,
leveling feet
Powering your
washing machine
Running a test cycle
Run Rinse±Spin Wi_h
Small amount Of
-_
Running
laundry (aboUt 85
Calibration Mode
towels) as a test Cycle
YES y
Check again before steps.
Finishing the
installation
Step-by-step
installation
STEP 1
Selecting a location
NOTE
Before you install the washer, make sure the location:
•
Has a hard, level surface without
carpeting or flooring
that may obstruct ventilation.
•
Is away from direct sunlight.
•
Has adequate ventilation.
•
Is not exposed to freezing
temperatures
(temperatures
under 32 °F or 0 oC).
•
Is away from heat sources such as oil or gas.
•
Has enough space so that the washer doesn't rest on its power cord.
20
English
WAS000] WA8700J
"_VA52J 03133Y 01 EN indd 20
2015/4/20
15:33:44
Capítulos
Tabla de contenido
Solución de problemas
