Stanley T81153v2.2 Guia De Instalacion página 2

Designer y vandal-resistant lectores
Reader Part Numbers / Leser Teilnummern / Numéros de pièces du lecteur / Números de pieza del
lector / Läsarens Artikelnummer/ Lezer Productnummers
Mullion Designer
Standard Designer
Vandal-Resistant
Card/Token Part Numbers / Karten/Token Teilnummern / Numéros de pièces de carte/fiche / Números
de pieza de la tarjeta/ficha / Kort/Nyckel Artikelnummer / Passen/Penningen Productnummers
Card/Karten/Kort/Passen
With Magstripe//Mit Magnetstreifen/avec bande magnétique/
Con banda magnética/med magnetremsa
Token/Nyckel /Penningen
Specification / Spezifikation / Spécification / Especificaciones / Specifikation / Specificaties / 技术规格
Card Range
Mullion Designer
up to 3.5in/90mm
Standard Designer
up to 7.8in/200mm
Vandal-Resistant
up to 1.9in/50mm
Temperature / Temperatur / Température / Temperatura / Temperatur / Temperatuur
Humidity / Feuchtigkeit / Humidité / Humedad / Luftfuktighet / Vochtigheid
Ingress Protection / Eindringschutz / Protection contre l'entrée / Protección de acceso / Kapsling /
Stofbescherming
FCC
Mullion Designer
FCC ID OQL-R-DM
Standard Designer
FCC ID OQL-R-DS
Vandal-Resistant
FCC ID OQL-R-VN
In compliance with FCC requirement 15.27 no special accessories are required in order to comply with part
15 of the FCC regulations.
Changes or modifications not expressly approved by Stanley Security Solutions could void the user's
authority to operate the equipment.
2
black/
grey/
schwarz/
grave/
noir/
grise/
negro/
grid
svart/
zwart
21N-MPR-
21N-MPR-
BLACK
GREY
21N-SPR-
21N-SPR-
BLACK
GREY
21N-VPR-SS
Token Range
up to 1.9in/50mm
up to 1.9in/50mm
up to 1.9in/50mm
Operating -3 to 130ºF/-20 to +55ºC; Storage -35 to175ºF/-30 to +80ºC
Operating 10 to 85% RH at 85 ± 4ºF/30 ± 2ºC for 24 hours
IP 66
white/
weiß/
blanc/
blanco/
vit/
wit
21N-MPR-
WHITE
21N-SPR-
WHITE
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
x10
11N-PT-10
x10
11N-MPT-10
x10
11N-FPT-10
Power
Current
+10.5 to +28V
<100mA
+10.5 to +28V
<100mA
+10.5 to +20V
<85mA
T81153v2.2
loading