Hardware Installation - Grandstream GWN7610 Guía De Instalación Rápida

EN
OVERVIEW
The GWN7610 is a high-performance 802.11ac wireless access point for
small to medium sized businesses, multiple floor offices, commercial loca-
tions and branch offices. It offers dual-band 4x4:4 MU-MIMO technology
and a sophisticated antenna design for maximum network throughput and
expanded Wi-Fi coverage range. To ensure easy installation and man-
agement, the GWN7610 uses a controller-less distributed network man-
agement design in which the controller is embedded within the product's
web user interface. For the sake of large-scale deployment, GWN7610
also supports to be managed by GWN Cloud system. With support for fast
roaming, advanced QoS, low-latency real-time applications, 200+ client
devices per AP and dual Gigabit network ports with PoE/PoE+, combin-
ing with the features of Mesh, Captive Portal and seamless connection
with Grandstream WP8XX series Wi-Fi phone, the GWN7610 is an ideal
wireless access point for large and small wireless network deployments.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 50
°C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7610 to environments outside of the following
humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7610 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit to
malfunction.
PACKAGE CONTENT
1x GWN7610 Mounting
Access Point Bracket
3 x Screw
3 x Screw
(PM 3 x 50)
(PA 3.5 x 20)
3x M3 NUT
Ceiling Mounting
Bracket
3 x Plastic 1 x Quick Installation
Expansion Bolt Guide
1 x GPL Statement
~ 1 ~
GWN7610 PORTS
Port Description
POWER Power adapter connector (DC24V, 1A)
Note: Power adapter is not provided.
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE.
NET Ethernet RJ45 port (10/100/1000Mbps) to your
router or another GWN7610.
USB 2.0 port (for future IOT & location based ap-
plications)
RESET Factory reset button. Press for 7 seconds to reset
factory default settings.
POWERING AND CONNECTING THE GWN7610
GWN7610 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the
GWN7610
Step 2: Plug the other end into the uplink port of the power over Ether-
net (PoE) switch.
Network Port

HARDWARE INSTALLATION

GWN7610 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~ 2 ~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch