Cleaning The Tool; Declaration Of Conformity; Environmental Protection - Worx WG584E Manual Del Usuario

Only one green
light (
is illuminated.
No light is illumi-
nated.
Only one light
is flashing twice
per cycle.
Only one light
is flashing three
times per cycle.
Only one light
is flashing four
times per cycle.
12

CLEANING THE TOOL

Clean the tool regularly.
Warning! Keep your product dry. Under
no circumstances spray with water.
- To clean the tool, use only mild soap and a
damp cloth.
- Do not use any type of detergent, cleaner
or solvent which may contain chemicals
that could seriously damage the plastic.
- Self lubricating bearings are used in
your product, therefore lubrication is not
required.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
Cordless Li-Ion Blower/Sweeper
The battery level of at
) least one battery pack is
very low. Please check
and charge the battery
pack.
At least one battery is
not fully installed or bat-
tery may be defective.
At least one battery is
over discharged (please
refer to the battery
charge condition),
please recharge the two
batteries at once before
use again or storage.
At least one battery is
hot, wait for them cool
down before start again.
The machine is over
load. Remove tool from
blowing area and try
again.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description WORX Cordless blower
Type WG584E WG584E.9 (5 -
designation of machinery, representative
of Cordless blower)
Function blowing
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per
Annex V
- Measured Sound Power Level
- Declared Guaranteed Sound Power Level
96 dB(A)
Standards conform to:
EN 60335-1, EN 50636-2-100, EN
62233, EN ISO 3744, EN 55014-1, EN
55014-2
The person authorized to compile the technical
file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne,
Germany
2018/05/08
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
95 dB(A)
EN