GE Monogram ZDT800 Serie Manual De Instrucciones página 19

Looding the Dishwosher
Dishwasher
The 3rd rack is also removable to allow extra large items to be placed in the upper rack.
To remove the 3rd rack:
r_ Remove the silverware and utensil trays.
(Seethe IMPORTANT NOTESin this section.)
r_ Push the rack all the way to one side so that
a gap between it and the side rail forms on
the other side. Align the side rail posts with
the center of the clips on the rack and lift
straight up.
Rail posts Align rail posts with
on inside Pullrack up
of rails
Rack
Push rack to
one side
Rail
will
in or out
of this
opening
Rack
Rail
post
r_continuing to hold the rack in the lifted
position, repeat on the other side.
El Once the rack is removed, push the side
rails all the way back into the dishwasher.
To replace the 3rd rack:
r_ Extendboth side railsfully out of the dishwasher.
[] Orientthe rack so that its side clips are aligned
and centered with the posts on the side rail and
lower the clips onto the posts.
r_ Movethe rack to one sideof the dishwasheruntil
the clips fall onto the posts.
E] Continuing to hold the rack in the lifted
position, repeat on the other side.
r_ once the rack is replaced, pull it all the way
out to lock it in place in its side rails.
Rack
clips
post
Pullrack all the way
out to lock it in place
r-6-1 Replace the silverware and utensil trays.
Rail
posts
19