Tabla de contenido
Idiomas disponibles
Idiomas disponibles
syncing two bases (optional)
A Sync Cord is included with the base. Not available on Queen, Full or King/Cal King size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
STEP 1
Unplug bases from power source.
STEP 2
Connect the Sync Cord to the Multifunction port of each
Control Box.
STEP 3
Plug bases back into the power source.
STEP 4
Check to ensure all cords are securely attached. Both remotes
will now operate both bases simultaneously.
The system is now linked. Buttons pressed on either
remote will control both bases simultaneously.
Control Box 1
Sync Cord
PERFORMANCE NOTES
If bases become mismatched, pressing the FLAT button will re-
sync the mechanical positions.
Control Box 2
11
Tabla de contenido
