Installation - Wattio THERMIC Manual Del Usuario

Installation

IT IS IMPORTANT THAT YOU OBSERVE SOME SIMPLE PRECAUTIONS:
Even if the installation is very simple, it is recommended the installation to be done by a
professional. Please read and act upon the important information on the following pages.
Do not force or bend the cables at any point during installation.
It is recommended to switch off the general energy
supply system. To change the batteries it is
recommended to switch off the general energy supply
system.
For a complete compatibility guarantee, it is
recommended to consult the cooling/heating system manufacturer its compatibility with the
Wattio thermostat. For air conditioning you can consult through chat in www.wattio.com the
capacity of the Thermic to control your system.
Remind that the GATE must always be on, both for the daily usage and the system installation.
THERMIC INSTALLATION STEPS:
First of all, it is important to write down the Identification code that you can see in the sticker of
the back side of the Thermic's frontal case. You will find a blank space to write it down in the
printed manual included in the pack. This code will have to be introduced during the registration
process of mobile app wizard, but do not worry; we will explain it later on.
NOTICE: To install the Thermic, it is recommended to place it 1.5 m above the floor and in an
area that does not receive direct sunlight or is exposed to heat or cold sources or to any other
element affecting the proper working way of the Thermic.
34