THOMSON dSc - 725S Manual De Instrucciones página 40

d - CONFigurATiON ANd uSE
1 2 3 4 5 6
12
Add a new camera
1
Software settings
2
Access to videos saved on the computer
3
Access to the operations log in the software
4
Selection of the number of cameras on the
5
screen at one time
Previous/next page. The software can manage
6
up to 64 cameras: these arrows let you switch
from cameras 5 to 8 then 9 to 12, etc.
Go to full screen
7
Launch a patrol (compatible cameras only)
8
Cut the image display for all of the cameras
9
Date, current time, processor load and hard
10
disk use
List of cameras saved to the software
11
Display frames for camera images
12
Controls available for the selected camera
13
Display of direction and zoom controls
14
(compatible cameras only)
To add your camera, click on the "Ajouter un
périphérique [Add a device]" icon on the top left:
14
en
7 8 9 10 11
13 14
OutdOOr 1080p Ip WI-FI camera
1 2 3 4
11 12
Camera UID (unique code shown on the
1
camera)
Camera user name (default is "admin")
2
Type of device: select "THOMSON IPC"
3
Name under which the camera will appear in
4
the software (according to your preference)
P2P connection: to be ticked to add a
5
camera using its UID. The UID of each of the
cameras is a unique code of 20 to 24 numbers
and letters, shown on the camera itself.
Current camera Ip address
6
Camera password (none by default, leave blank)
7
Test button for information entered: enables
8
you to check the connection, user name and
password entered
Current MAC address of the camera
9
Camera connection port (default 88)
10
Information related to the camera that you
11
a re in the process of adding
Button that adds the camera with the
12
information shown at the top of the window
Results of a camera search on the network
13
connected to the computer
Search button: searches for cameras on the
14
network to which the computer is connected
• Carry out the following steps to easily connect
your camera:
• Check the
connection]" box.
5 6 7 8 9
13
"Connexion P2P
10
14
[P2P