Preparing The Engine; Off-Season Storage - Craftsman CMXGMAM1125501 Manual De Instructiones

Preparing The Engine

For engines stored over 30 days:
• To prevent gum from forming in fuel system or on carburetor parts, run
engine until it stops from lack of fuel or add a gasoline additive to the gas
in the tank. If you use a gas additive, run the engine for several minutes to
circulate the additive through the carburetor.
• An oil change is not required but if you desire to change the oil then change
while the engine is warm.
• Clean engine of surface debris.

OFF-SEASON STORAGE

Never store lawn mower with fuel in tank indoors or in poorly ventilated
areas where fuel fumes may reach an open flame, spark, or pilot light as on
a furnace, water heater, clothes dryer, or gas appliance.
WARNING
Preparing The Lawn Mower
• Clean and lubricate mower thoroughly as described in the lubrication
instructions.
• Do not use a pressure washer or garden hose to clean your unit.
• Coat mower's cutting blade with chassis grease to prevent rusting.
When handling the cutting blade, protect your hands with a pair of heavy
gloves or use a heavy rag to hold the blade.
• Refer to Preparing the Engine for correct engine storage instructions.
• Store mower in a dry, clean area. Do not store next to corrosive materials,
such as fertilizer.
When storing any type of power equipment in a poorly ventilated or metal storage
shed, care should be taken to rust-proof the equipment. Using a light oil or silicone,
coat the equipment, especially cables and all moving parts of your lawn mower
before storage.
Battery
• The battery must be stored with a full charge. Extended storage of a
discharged battery will reduce life and capacity of the battery. For optimal
battery life, charge the battery once per month while in storage.
• Remove electric start push key and keep in a safe place out of the reach of
children.
18
WARNING