Transport; Environmental Protection; Insure The Lawnmower; Assembly - Stiga Park Serie Uso Y Mantenimiento

(Translation of the original instructions)
3.5

TRANSPORT

WARNING! - If the machine must be
transported on a truck or trailer, use
ramps with suitable resistance, width
and length.
During transport, close the fuel stop-
cock (if fitted), lower the cutting device
assembly or attachment, engage the
parking brake and fasten the machine
securely with ropes or chains to the
hauling device.
3.6

ENVIRONMENTAL PROTECTION

• Safeguarding the environment must be a
relevant and priority aspect of machine use, of
benefit to the community and the environment
we live in. Avoid being a disturbance to the
neighbourhood.
• Adhere strictly to the local regulations
governing the disposal of packaging, oil, fuel,
filters, damaged parts or any other element
which may have an impact on the environment;
this waste should not be disposed of along
with standard household waste, but must be
disposed of separately and sent to special
waste disposal facilities for handling and
recycling.
• Scrupulously comply with local regulations for
the disposal of waste materials after mowing.
• When the machine is withdrawn from service,
do not dispose of it in the environment,
but take it to a waste disposal facility in
accordance with the local regulations in force.
ENGLISH

4 INSURE THE LAWNMOWER

Check the insurance of the ride-on mower.
Contact your insurance company.
You must take out a policy that includes traffic,
fire, damage and theft.
Before first use, fully charge the bat-
tery.
Do not use the machine until all the in-
dications provided in the "ASSEMBLY"
section have been carried out.
Unpacking and completing the assem-
bly should be done on a flat and stable
surface, with enough space for moving
the machine and its packaging, always
making use of suitable equipment.
5.1

ASSEMBLY COMPONENTS (3)

The machine is delivered with the seat, the arm-
rests, the steering wheel, the tow bar, the quick
release supports removed and the battery placed
in its seat but disconnected.
The packaging includes the assembly compo-
nents (3) listed in the table below:
Pos. N. Description
B 2 Ignition key
C 2 Tension pin
D 1 Shim washer
E 1 Shim washer
F 2 Shoulder washer
G 2 Screw
H 2 Knobs
I 4 Washer
J 1 Tow plate
K 4 Screw
L 2 Nut
M 2 Battery screw
N 2 Battery nut
R 2 Grower washer

5 ASSEMBLY

EN
Dimensions
/
6x36
16x38x0.5
16x38x1.0
/
8x20
/
8.4x24x1.5
/
8x20
M8
/
/
14 x 8.2 x 2
11