NSS WRANGLER 1503 AE Uso Y Mantenimiento página 40

EN
3.1.b - Connecting the batteries
(for AB version only) (Fig. 4)
- Unscrew the bolt (3) that fasten the tank
(4) to the handle support.
- Remove the recovery water tank (4) and
connect the battery connectors (5 and
6).
- Replace the recovery water tank (4).
3.1.c - Electrical connection
(for AE version only)
- Connect the machine power cable to a
mains socket with a minimum capacity of
10A.
WARNING:
- Make sure that the mains system is
equipped with an RCD (circuit break-
er).
- Unwind the electric power cable com-
pletely before operating the appliance.
- Use an electrical extension lead only
if in perfect condition; ensure that the
section is appropriate for the appliance
power rating.
- Never let the power cable run over
sharp edges and do not tread on it.
4
3
5
EN-8
6
Fig. 4