Installing The Unit - Stiebel Eltron IS 5-1 E Instrucciones De Instalacion Y Uso

4. Installation Instruction

4.2 Installing the unit

1. Flush the cold water pipe
thoroughly.
2. Fit a secure connection cable (10
ensure dimensions are correct).
3. Release cover securing screw (11).
4. Remove cover.
5. Determine the position of the
drill holes and drill the holes.
Insert the wall plugs and screw in
the screws (ensure screw insertion
depth is correct, 12).
6. Feed the connection cable through
the cable seal (2) in the rear wall.
Guide the unit over the wall
securing screws and slide it
downwards (13).
8
for the qualified installer
7. Fit the cold water connection.
Connect the water valve (17) with
the filter (14) and the washer (15)
to the cold water inlet of the unit
(6). Tighten the union nut and
washer (16) to the water valve.
8. Straighten the unit and tighten
the screws.
9. Connect the electrical supply.
10. Fit the cover and secure with the
screw.
11. Turn the rotary control (B) to the
left and right (internal setting
lever will engage).
12. Fit the shower accessories to the
unit.
STIEBEL ELTRON