Safety Instructions - hager WDI07 Serie Manual De Instrucciones

z
Touch Panel 7´´ Android
Order no.: WDI070
Touch Panel 10´´ Android
Order no.: WDI100
Touch Panel 10´´ Windows 7
Order no.: WDI101
Touch Panel 16´´ Windows 7
Order no.: WDI161
Operating and assembly instructions

1 Safety instructions

Electrical equipment may only be installed and assembled by qualified
electricians in accordance with the relevant installation standards of the
country.
Failure to comply with these instructions may result in damage to the de-
vice, fire, or other hazards.
This is equipment of class A. It can cause radio interference in residen-
tial areas that the operator must counteract by means of appropriate
measures.
When supplying the system with Power over Ethernet (PoE) the overall
performance including all loads connected (e.g. USB devices) may not ex-
ceed the power consumption of IEEE 802.3af class 3.
In the case of device variants with PoE functions, make sure that no dif-
ferential ground potentials are used so that this function can be used.
When integrated into a door communication system (e.g. Elcom) or usage of
audio files the permissible PoE current consumption may be exceeded. This
may lead to a shutdown of the PoE supply. In this case a 24 V DC auxiliary
voltage supply is to be connected.
Do not operate the user interface with sharp-edged or pointed imple-
ments.
Do not use any sharp-edged implements for cleaning. Do not use any ac-
ids or organic solvents.
These instructions are an integral component of the product and must be
retained by the end user.
3