Appendix; Technical Data - hager WDI07 Serie Manual De Instrucciones

z
Dismantling the device
z If a device is mounted flush with the wall, loosen it from its fastening in the
flush-mounted housing by applying even, slight pressure and release.
The device will move slowly forward out of the housing.
z Loosen the screws and remove the device from the housing.
z Remove connections.

6 Appendix

6.1 Technical data

Capacitive TFT touch display
Storage temperature
Air humidity
Degree of protection
Cable cross-section of auxiliary voltage:
- flexible with conductor sleeve
- rigid
Conformity according to
Standards
7´´Android variant:
Resolution
Light intensity
Data transmission Ethernet
Port Ethernet
Power supply via:
- PoE (Power over Ethernet) or
- Auxiliary voltage
Power consumption:
- PoE (visualisation only)
- with auxiliary voltage (audio-playback, door communication)
Processor
Main memory
24
10 ... 90 % at 25 °C, non-condensing
EMC Directive 2004/108/EC
Voltage Directive 2006/95/EC
EN 55022: 2010 Class B
EN 60950-1 : 2006 + A2: 2013
1 GHz CPU "DaVinci" DM3750 Coretex A8
approx. 16:9
-20 ... +60 °C
IP20
max. 0.75 mm
max. 1.5 mm
EN 55024: 2010
800 x 480 pixels
300 cd/m
10/100 Mbit/s
1 x RJ45
18 ... 48 V DC
max. 13 W
max. 18 W
512 MB RAM
8 GB flash on SD card
2
2
2