TROUBLESHOOTING (Continued)
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
26 Troubleshooting
4-
-O
IN
NE
Favorite channel function does not work properly.
Some devices (e.g., Cable Boxes or Satellite Receivers) use
two-digit channel numbers. During programming, press
ENTER or OK once after entering a channel number (e.g., 0 2
ENTER for channel 2). See Programming Favorite Channel
Scan on page 21.
Cannot find a working code using the instructions in
Searching For Your Code.
See our website www.radioshack.com for help or take the
remote to your local RadioShack store.
Changing channels does not work properly.
If the original remote control required pressing ENTER to
change channels, then press ENTER on the remote after
entering channel numbers.
No remote control of volume.
See Changing Volume Lock on page 16 to lock/unlock
the volume.
Bottom IR segment flashes when pressing a key, but home
entertainment device does not respond.
Make sure the remote is aimed at your device and is not
farther away than 15 feet.
L
M
CH
and CH
Due to RCA design (1983-1987), only the original remote
control will operate these functions.
R
P
EMOTE
OWERED
do not work for your RCA TV.
B
K
Y
AMELEON