Safety Instructions; Initial Inspection - OutBack Power GTFX Serie Manual De Instalación

SAVE THESE INSTRUCTIONS
Read all instructions and cautionary markings on the FX, the batteries and all appropriate sections of
this installation and user manual as well as other component manuals before using the system.
Be cautious around electricity, electrical components, and batteries. Shocks, burns, injury, and even
death can occur if an installer comes in contact with electricity.
Install all components and wiring according to national and local electrical and building codes. This
includes:
OutBack Power Systems cannot be responsible for system failure, damages, or injury resulting from
improper installation of their products.
Use only the recommended DC and AC wire sizes or greater. Be sure all wires are in good condition.
Install the FX in a dry location, preferably indoors.
light for best operation.
mounted either with the base down (shelf mounting) or with the AC wiring compartment facing
down (wall mounting).
is a drainage system on the base of the FX to dispel condensation. If submerged, water can enter
this drain and cause failure.
It is not designed for exposure to water or excessive wind-blown dust and debris.

INITIAL INSPECTION

Your FX is stoutly packaged for secure shipping. Please inspect the packaging and component for
damage prior to installation.
IMPORTANT SAFETY INSTRUCTIONS
READ FIRST!
47