Bresser Junior MicroSet 40x-1024x Instrucciones De Uso página 10

RISK to your child.
Aids with sharp edges and tips are some-
times used with this device. Please store
the device and all of its accessories and aids out
of the reach of children. There is a risk of INJURY.
This device contains electronic components that
are powered by either a mains connection or
batteries. Never leave a child unsupervised with
this device. The device should only be used as
per these instructions otherwise there is a seri-
ous RISK of ELECTRICAL SHOCK.
Children should only use this device under su-
pervision. Keep packaging materials (plastic
bags, rubber bands, etc.) away from children.
There is a risk of SUFFOCATION.
The chemicals and liquids provided should be
kept out of reach of children. Do not drink the
chemicals! Hands should be washed thoroughly
under running water after use. In case of acci-
dental contact with the eyes or mouth rinse with
water. Seek medical treatment for ailments ari-
sing from contact with the chemical substances
and take the chemicals with you to the doctor.
10
FIRE-/ DANGER OF EXPLOSION!
Do not expose the device to high tem-
peratures. Use only the mains adapter
supplied or those battery types recommended.
Never short circuit the device or batteries or th-
row into a fire. Exposure to high temperatures
or misuse of the device can lead to short circuits,
fire or even explosion!
RISK of material damage
Never take the device apart. Please con-
sult your dealer if there are any defects.
The dealer will contact our service centre and
send the device in for repair if needed.
Position your device so that it can be disconnec-
ted from the power supply at any time. The wall
socket should always be located near the device
and be easily accessible, since the plug on the
power cord serves as a disconnecting device for
the power supply.
Do not subject the device to temperatures excee-
ding 60° C.
TIPS on cleaning
Remove the device from it's energy
source before cleaning (remove plug
from socket / remove batteries).
Clean the exterior of device with a dry cloth. Do
not use cleaning fluids so as to avoid causing da-
mage to electronic components.
Clean the lens (objective and eyepiece) only with
the cloth supplied or some other soft lint-free
cloth (e.g. micro-fibre). Do not use excessive
pressure - this may scratch the lens.
Dampen the cleaning cloth with a spectacle
cleaning fluid and use it on very dirty lenses.
Protect the device from dust and moisture. Store
the device in the bag supplied or in its original
packaging. Batteries should be removed from
the device if it is not going to be used for a long
period of time.